Reference Guide

Option Sub-option Valid
Arguments
Description Applicable Systems
--nicselection
NOTE: This option is
available only with
the appropriate
installed license.
dedicated
, lom1,
lom2,
lom3,
lom4
Sets the operating mode of the
iDRAC7 NIC to dedicated,
lom1, lom2, lom3, or lom4.
Some of these options are not
applicable on certain systems due
to underlying hardware.
NOTE: This
option is
applicable on
PowerEdge
11G systems.
--
nicselectionfailo
ver
NOTE: This option is
available only with
the appropriate
installed license.
none,
lom1,
lom2,
lom3,
lom4, all
Sets the operating mode of the NIC
selection failover to none, lom1,
lom2, lom3, lom4, or all.
Some of these options are not
applicable on certain systems. due
to underlying hardware.
NOTE: This
option is
applicable on
PowerEdge
12G systems.
--fullduplex
enable,
disable
Enables or disables full duplex on
the RAC network interface.
--autoneg enable,
disable
Enables or disables
autonegotiation.
--speed 10,100
Sets the network interface speed
to 10 or 100 Mbps.
--dnsdhcp enable,
disable
Enables or disables obtaining the
DNS server IP address through
DHCP.
--dnsserver1 <ipaddres
s>
Sets the IP address of the primary
DNS server for domain name
resolution.
--dnsserver2 <ipaddres
s>
Sets the IP address of the
secondary DNS server for domain
name resolution.
--dnsregisterrac enable,
disable
Enables or disables binding of the
RAC name to the IP address.
--dnsracname <string>
Sets the name of the RAC.
--
domainnamefromdhc
p
enable,
disable
Enables or disables getting the
RAC domain name through DHCP.
--domainname <string>
Sets the domain name of the RAC.
80