Reference Guide

Option Sub-option Valid
Arguments
Description Applicable Systems
--destipaddr <ipaddres
s>
Sets the destination IP address or
Fully Qualified Domain Name
(FQDN) for the alert destination
specified with the alertdest
sub-option.
The destipaddr sub-option is
dependent on the alertdest
suboption. If the alertdest sub-
option is not specified on the
command line, the first alert
destination (alertdest=1) is
set with this IP address or FQDN.
This sub-option can be replicated.
Example 1 (to set the destination IP
address):
A:>syscfg lcp --
alertdest=1 --
destipaddr=192.168.100.
15
Example 2 (to set the destination IP
address as FQDN):
A:>syscfg lcp --
alertdest=1 --
destipaddr=xxx.yyy.com
NOTE: FQDN is
applicable
only for
destipaddr
option and is
supported only
on PowerEdge
12G systems.
--alertdest
1, 2, 3,
4
Sets the destination for the LAN
alert. This sub-option can be
replicated.
--vlantag enable,
disable
Enables or disables VLAN tagging.
This sub-option can be replicated.
--vlanid <string>
Sets the 12-bit VLAN ID. This sub-
option can be replicated.
--vlanpriority 0–7
Sets the VLAN priority value. This
sub-option can be replicated.
--macaddress
NA Displays the BMC MAC address.
This sub-option cannot be
replicated.
--nicselection
NOTE: This option is
available only with
the appropriate
installed license.
shared,
sharedfai
lover,
dedicated
,
sharedrec
eiveonall
Sets the operating mode of the NIC
to shared, sharedfailover,
dedicated, or
sharedreceiveonall. Some
of these options are not applicable
on certain systems.
This option is
applicable on
systems prior to
PowerEdge 12G
systems. The
sharedreceive
onall argument is
available only on
PowerEdge 11G
systems.
79