Reference Guide

Description
Enables or disables the Intel TXT option. This option can be replicated.
Example:
A:>syscfg --inteltxt=enable
inteltxt=enable
NOTE: To enable the Intel TXT option in a supported processor, make sure
that the:
• Virtualization technology in Processor setting is enabled.
• TPM module is installed and initialed as OK by BIOS.
• TPM security in System security is set to on with pre-boot
measurements.
• User password is not set.
Applicable Systems
All PowerEdge 11G systems with Intel processors.
--internalusb
Option
--internalusb
Valid Arguments off, on
Description
Turns on or off all the user-accessible USB ports. This option can be replicated.
Example:
A:>syscfg --internalusb=on
internalusb=on
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
--ioat
Option
--ioat
Valid Arguments enable, disable
Description
Enables or disables the I/O Acceleration Technology (I/OAT) DMA Engine
option. This option must be enabled only if the hardware and software support
I/OAT on your system. This option can be replicated.
Example:
A:>syscfg --ioat=enable
ioat=enable
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
--lcd
Option
--lcd
Valid Arguments default, none, user, idracipv4address, idracmacaddress, ossystemname,
servicetag, ipv6address, ambienttemp, systemwatts
Description
Displays the default string (model name and number for PowerEdge systems
earlier than Dell PowerEdge 11G, and service tag for PowerEdge systems 11G
and later) or a userdefined string on the front-panel LCD based on the specified
argument. This option can be replicated.
40