Reference Guide

--embnic1nic2
Option
--embnic1nic2
Valid Arguments enable, disable
Description
Enables or disables the operating system interface of the first and second
embedded NIC controllers.
Example:
A:>syscfg --embnic1nic2=enable
--embnic1nic2=enable
Applicable Systems PowerEdge 1855, PowerEdge 6850, and PowerEdge 11G systems
--embnic3nic4
Option
--embnic3nic4
Valid Arguments enable, disable
Description
Enables or disables the operating system interface of the third and fourth
embedded NIC controllers.
Example:
A:>syscfg --embnic3nic4=enable
--embnic3nic4=enable
Applicable Systems PowerEdge 11G systems
--embnics
Option
--embnics
Valid Arguments enable, disable
Description
Turns both the embedded NICs on or off. This option is only present on systems
that do not support the embnic1 and embnic2 options. This option can be
replicated.
Example:
A:>syscfg --embnics=enable
--embnics=enable
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
--embnic1pxe
Option
--embnic1pxe
Valid Arguments enable, disable
Description
Enables or disables Preboot Execution Environment (PXE) on the first
embedded NIC. If PXE is disabled, the first NIC is not found in the boot order. If
PXE is enabled, the first NIC is placed at the end of the boot order. This option
is only present on systems that do not support the embnic1 option. This option
can be replicated.
32