Reference Guide

embedded NICs. If the second NIC is enabled without PXE, it is not found in the
boot order. If the second NIC is turned on with PXE, it is placed at the end of
the boot order. The onnopxe argument is not supported on all systems. This
option can be replicated.
The onwithiscsi argument enables the embedded NIC to boot from the iSCSI
server. The embnic2 option can be replicated.
Example:
A:>syscfg --embnic2=onnopxe
embnic2=onnopxe
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
--embnic3
Option
--embnic3
Valid Arguments on, off, onnopxe, onwithiscsi
Description
Turns the third embedded NIC on with PXE enabled, off, or on without PXE
enabled. This option is only valid for supported systems that have three
embedded NICs. If the third NIC is enabled without PXE, it is not found in the
boot order. If the third NIC is turned on with PXE, it is placed at the end of the
boot order. The onnopxe argument is not supported on all systems. This option
can be replicated.
The onwithiscsi argument enables the embedded NIC to boot from the iSCSI
server. The embnic3 option can be replicated.
Example:
A:>syscfg --embnic3=onnopxe
embnic3=onnopxe
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
--embnic4
Option
--embnic4
Valid Arguments on, off, onnopxe, onwithiscsi
Description
Turns the fourth embedded NIC on with PXE enabled, off, or on without PXE
enabled. This option is only valid for supported systems that have four
embedded NICs. If the fourth NIC is enabled without PXE, it is not found in the
boot order. If the fourth NIC is turned on with PXE, it is placed at the end of the
boot order. The onnopxe argument is not supported on all systems. This option
can be replicated.
The onwithiscsi argument enables the embedded NIC to boot from the iSCSI
server. The embnic4 option can be replicated.
Example:
A:>syscfg --embnic4=onnopxe
embnic4=onnopxe
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
31