Reference Guide

--embhypervisor
Option
--embhypervisor
Valid Arguments off, on
Description
Turns on or off the embedded hypervisor port.
Example:
A:>syscfg --embhypervisor=on
embhypervisor=on
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
--embideraid
Option
--embideraid
Valid Arguments on, off
Description
Turns on or off the embedded IDE RAID controller. This option is only valid for
supported systems that have IDE ROMB. This option can be replicated.
Example:
A:>syscfg --embideraid=on
embideraid=on
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
--embnic1
Option
--embnic1
Valid Arguments on, off, onnopxe, onwithiscsi
Description
Turns the first embedded NIC on with PXE on, off, or on without PXE enabled.
This option is only valid for supported systems that have a NIC. If the NIC is
enabled without PXE, it is not found in the boot order. If the NIC is turned on
with PXE, it is placed at the end of the boot order. The onnopxe argument is not
supported on all systems.
The onwithiscsi argument enables the embedded NIC to boot from the iSCSI
server. The embnic1 option can be replicated.
Example:
A:>syscfg --embnic1=onnopxe
embnic1=onnopxe
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
--embnic2
Option
--embnic2
Valid Arguments on, off, onnopxe, onwithiscsi
Description
Turns the second embedded NIC on with PXE enabled, off, or on without PXE
enabled. This option is only valid for supported systems that have two
30