Reference Guide

Error Code Message
6 Error: Partitions exists. Please clear all the partitions
before running upinit.sh.
7 Error: DOS file(s) not found at the specified path.
8 Error: UP IMAGE not found at the specified location.
9 Error: format failed.
10 Error: Invalid size. Size should be a number between 32 and
2000.
11 Error: sysdrmk failed.
12 System Error.
13 Error: Invalid Argument: <argument>
14 Error: Unzip failed.
UPINIT Linux-Specific Error Codes And Messages
The list of error codes and messages are specific to the Linux environment.
Table 83. UPINIT Linux-Specific Error Codes and Messages
Error Code Message
31 Error: Invalid disk specified.
32 Error: Mount failed.
33 Cannot create mount point <mount point>.File exists
34 Error: fdisk failed.
UPINIT Windows PE-Specific Error Codes And Messages
The list of error codes and messages below are specific to the Windows PE environment.
Table 84. UPINIT Windows PE-Specific Error Codes and Messages
Error Code Message
31 Error: DISKPART failed.
32 Error: DISKPART command file not found.
RAIDCFG Error Codes And Messages
The RAIDCFG utility checks your commands for correct syntax when you enter them. When you enter a command, a
message displays stating the results of the command.
Failure Messages
The RAIDCFG utility failure messages provide error codes to help diagnose why some commands do not succeed. See
table below for a list of the error codes and the associated messages.
149