Quick Reference Guide

Option Sub-option Valid Arguments Description Applicable Systems
BMC to a known-good state. This
option cannot be replicated.
NOTE: The NMI, power button,
and SOL defaults are not reset
by using this option.
Example:
A:>syscfg --loaddefaults
Loading defaults...
nextboot
Table 38. nextboot option
Option Sub-option Valid
Arguments
Description Applicable Systems
--nextboot or
--
OneTimeBootSeq
Dev
NA valid device
name (from the
bootseq
option device
list)
Sets the specified device as the
first device in the boot order for
the next boot cycle only. The
device must be a device from the
bootseq option device list. Run
the bootseq option to see a list
of available device names. For
more information, see
--bootseq.
This option is not replicated.
Example 1:
A:>syscfg --bootseq
Device 1: floppy.emb.0
- Diskette Drive A:
Device 2: cdrom.emb.0
- CD-ROM device
Device 3: hdd.emb.0 -
Hard Drive C:
Device 4: nic.emb.1 -
Intel Boot Agent
Version 4.0.17
Device 5: nic.emb.2 -
Intel Boot Agent
Version 4.0.17
Example 2:
A:>syscfg --
nextboot=nic.emb.1
nextboot=nic.emb.1
All PowerEdge
systems
87