Quick Reference Guide

Supported Systems

For a complete list of supported Dell PowerEdge systems, see the

Dell Systems Software Support Matrix

in the required

version of OpenManage Software at dell.com/openmanagemanuals

Supported Operating Systems

For Windows, the DTK utilities support Windows PE 3.0 (32-bit and 64-bit) and Windows PE 4.0 (64–bit). Using the DTK

utilities, we can deploy the following Windows operating systems:

• Microsoft Windows Server 2012 (64–bit)

• Windows Server 2008 SP2 (32-bit and 64-bit)

• Windows Server 2008 R2 SP1

• Windows Server 2012 Essentials (64–bit)

For Linux, the DTK utilities support the following operating systems:

• Red Hat Enterprise Linux 6.4 (64–bit) in BIOS and UEFI mode

• Red Hat Enterprise Linux 5.9 (64–bit and 32–bit) in BIOS mode

• SUSE Linux Enterprise Server 11 SP2 in BIOS and UEFI mode

• SUSE Linux Enterprise Server 10 SP4 (64-bit) in BIOS mode

You can install DTK Linux RPM utilities on the following operating systems:

• Red Hat Enterprise Linux 6.4 (64–bit)

• Red Hat Enterprise Linux 5.9 (64–bit and 32–bit)

• SUSE Linux Enterprise Server 11 SP2

• SUSE Linux Enterprise Server 10 SP4 (64-bit)

NOTE: The RPMs are available in the RPMs folder of DTK ELI ISO and also at linux.dell.com/repo/hardware.

Toolkit Utilities

DTK contains utilities that allow you to configure the BIOS, Baseboard Management Controller (BMC), Remote Access

Controller (RAC), RAID controllers, and hard-drive partitions on supported Dell systems. Additionally, the utilities can be

integrated with the sample files provided with the toolkit to fully configure one-to-many target systems in a scripted

mass system deployment.

System Configuration Utility

The SYSCFG utility performs the following tasks:

• Reports and sets BIOS configuration options.

• Reports and sets BMC/RAC configuration options.

• Reports and sets user-configurable states.

• Reports system information, including PCI device detection.