Quick Reference Guide

Group Option Valid Arguments Description
--TpmStatus
NA Displays the current status of TPM.
UEFI Boot Settings
Table 23. UEFI Boot Setting Options
Group Option Valid Arguments Description
UEFI Boot Settings
--UefiBootSeq
list of device names
separated by commas
Sets the UEFI boot order. The first option in
the list is attempted first. If the first option
is not successful, the second option is
attempted, and so on. The system attempts
to launch only the enabled boot options
and does not launch disabled boot options.
This option is applicable when
bootmode
is set to UEFI and has no effect when
bootmode is set to BIOS.
SYSCFG For BMC And Remote Access Controller Configuration
SYSCFG configures Baseboard Management Controller (BMC) and Remote Access Controller (RAC) settings.
NOTE: Some of the following options or arguments might not be available on all systems.
NOTE: For options that use text strings such as username, password, hostname, and community string, using some
characters such as <space>, <, >, | , or = on the command line can be misinterpreted by the command line parser
and cause errors.
NOTE: The following options or arguments are also applicable to DRAC 5.
The following tables document valid options, sub-options, and arguments along with a description of the expected
behavior of each option and suboption. Options, sub-options, and arguments are case-sensitive. All options, sub-options,
and pre-defined arguments are lowercase unless explicitly stated otherwise. Some features that must be noted while
reading this section are:
• Unless otherwise specified, all sub-options to options are optional.
• If a sub-option is not specified for an option, all valid sub-option values are displayed for the option. If sub-
options are specified, then only those suboptions are reported.
• Wherever options or sub-options take empty strings as input, the string NULL should be input. For example,
options such as username and suboptions such as commstring and hostname can take an empty string as input.
bmcversion
Table 24. bmcversion options
Option Sub-option Valid Arguments Description Applicable Systems
bmcversion
Displays the version information for
the BMC and the BMC firmware.
This option cannot be replicated.
All PowerEdge
systems
--devid
NA Reports the BMC device ID.
--
devrevision
NA Reports the BMC device revision.
77