Quick Reference Guide

Group Option Valid Arguments Description
NOTE: The Asset Tag is a string
assigned to a system, usually by an
administrator, for security or tracking
purposes. The Asset Tag can be up to
10 characters long and can contain
only printable US-ASCII characters.
--ErrPrompt
Enabled,
Disabled
Enables (default value) or disables the
F1/F2 prompt on error.
--
InSystemCharac
terization
Enabled,
Disabled
Enables or disables In-System
characterization.
--NumLock On, Off
Determines whether the system boots with
NumLock turned on or off. This does not
apply to 84- key keyboards.
--ReportKbdErr Report, Noreport
Sets if keyboard-related error messages
are reported at system startup or not.
One-Time Boot
Table 15. One-Time Boot Options
Group Option Valid Arguments Description
One-Time
Boot
--OneTimeBootMode Disabled,
OneTimeBootSeq,
OneTimeHddSeq,
OneTimeUefiBoot
Seq,
OneTimeCustomB
ootSeqStr,
OneTimeCustomH
ddSeqStr,
OneTimeCustomU
efiBootSeqStr
Allows to set the one-time boot sequence.
--
OneTimeBootSeqDev
numerical list separated
by commas or list of
device names separated
by commas
Determines the one-time boot device when
the One- Time Boot Device List is set to BIOS
Boot Sequence Device. If Boot Mode is set to
UEFI, the system temporarily switches the
Boot Mode to BIOS when attempting a one-
time boot to the device.
--OneTimeHddSeqDev
numerical list separated
by commas or list of
device names separated
by commas
Determines the one-time boot hard disk
when the One-Time Boot Device List is set to
BIOS Hard-Disk Drive Sequence Device. If
Boot Mode is set to UEFI , the system
temporarily switches the Boot Mode to BIOS
when attempting a one-time boot to the
device.
--
OneTimeUefiBootSeq
Dev
numerical list separated
by commas or list of
device names separated
by commas
Determines the one-time boot device when
the One-Time Boot Device List is set to UEFI
Boot Sequence Device. If Boot Mode is set to
BIOS, the system temporarily switches the
68