Quick Reference Guide

Group Option Valid Arguments Description
capability and the installed DIMM
population. This option also enables
setting the system DIMM voltage to a
higher (1.5V) setting if the DIMMs support
multiple voltages and have been set to a
lower voltage.
NOTE: Volt15V represents 1.5 Volt.
--MemTest
Enabled,
Disabled
Enables or disables the POST extended
memory test.
--MonitorMwait Enabled,
Disabled
Enables or disables Monitor/Mwait
instructions. You can disable Monitor/
Mwait only when C state is disabled in
Custom mode.
--NodeInterleave
Enabled,
Disabled
Enables node interleaving, if the system is
configured with matching memory. If set
to Disabled (default), the system
supports Non-Uniform Memory (NUMA)
architecture memory configurations. This
field is active only if the memory
configuration can support node
interleaving.
NOTE: The NodeInterleave
option is same as memintleave
option. For more information, see
memintleave.
--SerialDbgOut
Enabled,
Disabled
Enables or disables the RC/MRC Serial
debug output.
--SysMemSize <string>
Displays the amount of main memory in
the system.
--SysMemSpeed <string>
Displays the clock frequency of the main
memory.
--SysMemType <string>
Displays the type of main memory
installed in the system.
--SysMemVolt <string>
Displays the voltage of the main memory.
--VideoMem <string>
Displays the total amount of video memory
available to the embedded video
controller.
Miscellaneous Settings
Table 14. Miscellaneous Settings Options
Group Option Valid Arguments Description
Miscellaneous
Settings
--AssetTag <string>
Displays the Asset Tag and allows the
Asset Tag to be modified.
67