Quick Reference Guide

Group Option Valid Arguments Description
NOTE: This option is supported on
PowerEdge R410, R510, R610, R710,
R910, T410, T610, T710, and
PowerEdge 12G systems with Intel
Xeon processor 7500/6500 series.
--UsbPorts
AllOn,
OnlyBackPortsOn
, AllOff
Sets the user accessible USB Ports.
Selecting OnlyBackPortsOn
disables front USB ports, and selecting
AllOff disables both front and back
USB ports.
Memory Settings
Table 13. Memory Settings Options
Group Option Valid Arguments Description
Memory
Settings
--
CollaborativeCpuPerfCt
rl
Enabled,
Disabled
When set to Enabled, the operating
system demand based power
management (OS DBPM) and system
demand based power management
(System DBPM) controls the CPU power
management. This feature can be enabled
only when CPU power management
(
ProcPwrPerf) is set to system DBPM
in Custom mode.
--
DynamicCoreAllocation
Enabled,
Disabled
Enables or disables the operating system
capability to maintain the logical
processors in the idle state to reduce
power consumption.
--MemOpMode
OptimizerMode,
SpareMode,
MirrorMode,
AdvEccMode,
SpareWithAdvEccM
ode
Sets the memory operating mode. This
feature is active only if a valid memory
configuration is detected. When
OptimizerMode is enabled, the DRAM
controllers operate independently in 64-bit
mode and provide optimized memory
performance. When
MirrorMode is
enabled, only half of the installed memory
is reported as available to the operating
system. When AdvECCMode is enabled,
the two DRAM controllers are combined
in 128-bit mode to provide optimized
reliability. Memory that cannot be teamed
by the controllers is not reported to the
operating system. When SpareMode is
enabled, the memory size reported to the
operating system does not include the
spare portion.
--MemOpVoltage AutoVolt,
Volt15V
Sets the DIMM voltage selection. When
set to AutoVolt(default value), the
system automatically sets the voltage to
the optimal setting based upon the DIMM
66