Quick Reference Guide

Group Option Valid Arguments Description
NOTE: If set to DisabledOs, the
Integrated NICs may still be
available for shared network
access by the embedded
management controller. This
function must be configured
through the NIC management
utilities provided with your system.
--IntegratedRaid
Enabled,
Disabled
Enables or disables the integrated RAID
controller.
--IntegratedSas Enabled,
Disabled
Enables or disables the integrated SAS
controller.
--InternalSdCard On, Off
Turns the internal SD card port on or
off.
--
InternalSdCardRedundan
cy
Mirror,
Disabled
Sets the internal SD card port
redundancy to Mirror mode or
Disabled.
When set to Mirror mode, read-
write operation occurs on both the
secure digital (SD) cards. When one of
the SD cards fails and is replaced, on
booting, the data of the active card is
copied to the offline card.
When set to Disabled, read-write
operation occurs only on SD card 1.
NOTE: On Blade systems, disable
the vflash key to configure this
option. This option is applicable
only on PowerEdge R810, R815,
R910, M910, and PowerEdge 12G
systems.
--InternalUsb On, Off
Turns the internal USB port on or off.
--InternalUsb1 On, Off
Turns the internal USB port 1 on or off.
--InternalUsb2 On, Off
Turns the internal USB port 2 on or off.
--IoatEngine Enabled,
Disabled
Enables or disables the I/O Acceleration
Technology (I/OAT) option.
--OsWatchdogTimer Enabled,
Disabled
Aids in the recovery of the operating
system when the system does not
respond. When set to Enabled, the
operating system is allowed to initialize
the timer. When it is set to Disabled
(default value), the timer has no effect
on the system.
--SriovGlobalEnable
Enabled,
Disabled
Enables or disables support for Single
Root I/O Virtualization (SR-IOV) devices.
65