Quick Reference Guide

Option Sub-option Arguments Description
--tpmclear
NA Clears the contents of the TPM chip without
erasing the tpmsecurity and tpmactivation settings.
Example:
A:>syscfg tpm --
tpmactivation=enabled --tpmclear
--setuppwdoverride
--undotpmclear
NA
Cancels the result of the tpmclear setting. If you
specify this setting before specifying the tpmclear
setting, the There is currently no
pending TPM Clear request message is
displayed.
Example:
A:>syscfg tpm --
tpmactivation=enabled --
undotpmclear --setuppwdoverride
--valsetuppwd
< string >
Validates the setup password for TPM
authentication. If you try to change DTK settings,
you are prompted to enter this password to access
the settings. For more information on delimiters, see
Command Line Option Delimiters.
Example:
A:>syscfg tpm --
tpmactivation=enabled --tpmclear
--valsetuppwd=<setup_password>
--
setuppwdoverri
de
NA
On systems that do not have a setup password
configured, if you set this option, you are not
prompted for a password to access DTK settings.
A:>syscfg tpm --
tpmactivation=enabled --tpmclear
--setuppwdoverride
Sub Options And Arguments For tcm Option
Table 7. Sub-options and Arguments for the tcm Option
Option Sub-option Arguments Description
tcm --tcmsecurity
off Does not report the presence of TCM to the
operating system.
on
Reports the presence of TCM to the operating
system.
Example:
A:>syscfg tcm --tcmsecurity=off
--
tcmactivation
enabled Enables and activates the TCM feature.
disabled Disables and deactivates the TCM feature.
60