Quick Reference Guide

Description

Enables or disables vflash on iDRAC.

Example:

A:>syscfg --vflash=enable

vflash=enable

Applicable Systems All PowerEdge 11G systems or systems with iDRAC6

Sub Options And Arguments For tpm Option

The following table lists the sub-options and arguments for the tpm option.

Table 6. Sub-options and Arguments for the tpm Option

Option Sub-option Arguments Description

tpm --tpmsecurity

off Does not report the presence of TPM to the

operating system.

onwithpbm Directs the BIOS to store the TCG compliant

measurements to the TPM during a POST

operation.

onwithoutpbm Directs the BIOS to bypass the preboot

measurements.

Example:

A:>syscfg tpm --

tpmsecurity=onwithoutpbm

--setuppwdoverride

tpmactivation

enabled Enables and activates the TPM feature.

disabled Disables and deactivates the TPM feature.

nochange Does not alter the operational state of the TPM

feature.

Example:

A:>syscfg tpm --

tpmactivation=enabled --

setuppwdoverride

NOTE: You cannot set tpmactivation when

tpmsecurity is set to off.

NOTE: After setting tpmactivation to enabled or

disabled, if you reboot your system, DTK

displays the TPM Configuration

Honoured system will reset and

the system reboots again

message

and reboots.

NOTE: When you set tpmactivation to enabled

or disabled, DTK displays the value of

tpmactivation as nochange. However, the TPM

feature is activated/deactivated when you

reboot the system.