Quick Reference Guide

--sriov
Option
--sriov
Valid Arguments enable, disable
Description
Enables or disables support for Single Root I/O Virtualization (SR-IOV) devices.
Example:
A:>syscfg --sriov=disable
sriov=disable
Applicable Systems PowerEdge R410, R510, R610, R710, R910, T410, T610, and T710 systems prior to
PowerEdge12G systems with Intel Xeon processor 7500/6500 series.
--svctag*
Option
--svctag*
NOTE: The asterisk is not part of the command syntax.
Valid Arguments NA
Description
Reports the service tag for a system. If used with the -s general option, the
environment variable is set to the service tag.
Example:
A:>syscfg --svctag
svctag=113CD1S
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems except Blade
systems.
--syspwd
Option
--syspwd
Valid Arguments < string >
Description
Sets the system password for the BIOS. The system password is required when
booting the system. The argument string supplied to this option is the password.
Generally, passwords are limited to alphanumeric characters and cannot
exceed 32 characters in length. If a current system password is set, it must be
given through the oldsyspwd option. This option is not replicated. For more
information on delimiters, see Command Line Option Delimiters .
Example 1:
A:>syscfg --syspwd=password
The password has been set. Please use a warm reboot
to apply the password to the system.
Example 2:
A:>syscfg --syspwd=password --oldsyspwd=password
The password has been set. Please use a warm reboot
to apply the password to the system
.
NOTE: You cannot disable your password using DTK. To disable your
password, you must use the system BIOS.
56