Quick Reference Guide

length. If a current setup password is set, it must be given through the
oldsetuppwd option. This option is not replicated. For more information on
delimiters, see Command Line Option Delimiters .
Example:
A:>syscfg --setuppwd=asetuppassword
The password has been set. Please use a warm reboot
to apply the password to the system.
Example 2:
A:>syscfg --setuppwd=asetuppassword --
oldsetuppwd=currentpassword
The password has been set. Please use a warm reboot
to apply the password to the system.
Example 3:
A:>syscfg --setuppwd=asetuppassword --
oldsetuppwd=currentpassword
The old password entered is incorrect. The new
password will not be set. Please try again.
NOTE: You cannot disable your password using DTK. To disable your
password, you must use the system BIOS.
Applicable Systems
All PowerEdge systems prior to PowerEdge 12G systems.
--sma
Option
--sma
Valid Arguments enable, disable
Description
Enables or disables processor sequential memory access.
Example:
A:>syscfg --sma=disable
sma=disable
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
--slotname*
Option
--slotname*
NOTE: The asterisk is not part of the command syntax.
Valid Arguments NA
Description
Reports the slot name of the blade.
Example:
A:>syscfg --slotname
slotname=Slot5
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
55