Quick Reference Guide

--remflashmedia
Option
--remflashmedia
Valid Arguments read-only
Description
Displays the redundancy status of internal dual SD module. The status can be:
• Full — Secure digital card (SD) 1 and 2 are functioning properly.
• Lost — Either any of the secure digital cards or both are not
functioning properly.
The option also displays the status of the individual SD cards as follows:
• Active — The card is used for secure digital reads.
• Standby — The card is receiving a copy of all secure digital reads.
• Failed — An error is reported during a secure digital read or write.
• Absent — No secure digital media is detected.
• Offline — At boot, card identification signature is different from the
non-volatile storage value or card is the destination of a copying
operation that is in progress.
• Write Protected — The card is write-protected.
Example:
A:>syscfg --remflashmedia
Internal Dual SD ModuleRedundancy=Lost
SD1 status=Absent
SD1 status=Active
Applicable Systems
PowerEdge R810, R815, R910, and M910 systems
--rptkeyerr
Option
--rptkeyerr
Valid Arguments enable, disable
Description
Enables or disables the BIOS to report keyboard errors during POST. This
option can be replicated.
Example:
A:>syscfg --rptkeyerr=disable
rptkeyerr=disable
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
--sata0
Option
--sata0
Valid Arguments auto, off
Description
Turns the SATA port 0 to auto or off. This option can be replicated.
50