Quick Reference Guide

Description
Configures or reports the I/O address of the LPT (parallel) port. This option is
available on all supported systems with an LPT port. This option is recorded to
an output file for replication.
Example:
A:>syscfg --lpt=lpt1
lpt=lpt1
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
-memdynamicpower
Option
--memdynamicpower
Valid Arguments enable, disable
Description
Enables or disables the dynamic memory power states. This option can be
replicated.
Example:
A:>syscfg --memdynamicpower=enable
memdynamicpower=enable
Applicable Systems PowerEdge R910 system with Intel Xeon 7500 series
--memintleave
Option
--memintleave
Valid Arguments enable, disable
Description
Enables or disables the memory interleave mode. This option can be replicated.
Example:
A:>syscfg --memintleave=enable
memintleave=enable
NOTE: The memintleave option is same as Nodeinterleave option. For more
information, see
Memory Settings group.
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
--memoperatingmode
Option
--memoperatingmode
Valid Arguments optimizer, mirror, advancedecc
Description
Selects the memory operating mode. This feature is active only if a valid
memory configuration is detected.
Example:
A:>syscfg --memoperatingmode=optimizer
memoperatingmode=optimizer
Applicable Systems PowerEdge 11G systems
44