Quick Reference Guide

Error Code Message
59 There is not enough free space on the array disk(s) to allow
the operation to complete; the size of the virtual disk is too
large; or communication to the array disk(s) has been lost.
60 Limit your array disk selection to those disks already
included in another single virtual disk or to those array
disks that are not used at all by another virtual disk.
61 Invalid Parameter
62 Failed drive cannot be added.
63 The controller cannot support the number of array disks that
you have selected. Choose a smaller number.
64 Delete virtual disk failed. Controller busy.
65 Delete virtual disk failed.
66 Create virtual disk failed.
67 Create virtual disk failed. Controller busy.
68 Create virtual disk failed. Failed to map virtual disk to
operating system disk.
69 Create virtual disk failed. Failed to map virtual disk to
operating system disk.
70 Virtual disk initialization failed.
71 Virtual disk initialization failed. Controller busy.
72 Virtual disk reconstruction failed. Controller busy.
73 Virtual disk resynching failed. Controller busy.
74 Flush Virtual disk's cache failed on controller.
75 Virtual disk partition specified not found.
76 Unsupported cache policy value.
77 Unsupported write policy value.
78 Unsupported read policy value.
79 Cancel initialization on virtual disk failed.
80 Cancel reconstruction on virtual disk failed.
81 Cancel resynchronization on virtual disk failed.
82 The maximum number of virtual disks that can be created has
been reached.
83 The new virtual disk must use only the remaining free space on
the array disks used in the last virtual disk you created.
Select all array disks that are used in the last virtual disk
you created.
157