Quick Reference Guide

Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
log file or creates a new file. The log file
contains the same information as standard
output. This option is optional and can be
added to the command line in any order after
the mandatory options have been added.
Example:
A:>raidcfg -ctrl -l=log.txt
Controller_ID/Slot_ID: 0
Controller_PCI_ID: 4:2:1
Controller_Name: Dell
PERC 6/E
Channels: 2
Virtual_Disks: 0
Firmware Version:
V2.8-0[6064]
RAIDCFG Command successful!
-si or silent
NA
Does not display any information on the
terminal console. This option is optional and
can be added to the command line in any
order after any mandatory options have been
added.
Example:
A:>raidcfg -ctrl -si
-ver or
version
NA
Displays the version number of the RAIDCFG
utility. This option is optional and can be
added to the command line in any order after
any mandatory options have been added.
Example:
A:>raidcfg -ver
RAIDCFG V4.3
Copyright (c) 2002-2013 Dell
Inc.
RAIDCFG Command successful!
Quick Reference To RAIDCFG Commands
The following table lists the basic RAIDCFG commands.
Purpose Command Description
To list all the RAID
controllers in a system
raidcfg -ctrl
Lists all the RAID controllers in the system.
Record the slot ID of the controllers for later reference.
137