Quick Reference Guide

Setting And Displaying The PCIe Link Speed
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for setting and displaying the
Peripheral Component Interconnect Express (PCIe) link speed of the controller.
Table 76. Setting and Displaying the PCIe Link Speed
Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
--ctrl -c=id -
ac=spciels -
spd=<2 | 3>
or
controller
controllerid=i
d
action=setpcie
linkspeed
speed=<2 | 3>
NA NA
Sets the PCIe link speed of the controller to
PCIe Generation 2 or 3.
NOTE: Reboot the system to apply the
setting.
Example:
A:>raidcfg -ctrl -c=2 -
ac=spciels -spd=2
RAIDCFG Command successful!
--ctrl -c=id -
ac=gpciels
or
controller
controllerid=i
d
action=getpcie
linkspeed
NA NA
Displays the PCIe link speed of the controller.
Example:
A:>raidcfg -ctrl -c=2 -
ac=gpciels
RAIDCFG Command successful!
Supported Controllers And Firmware Versions For PCIe Link Speed
The following table lists the controllers and minimum supported firmware versions for PCIe link speed.
Table 77. Supported Controllers And Firmware Versions For PCIe Link Speed
Controllers Component Minimum Supported Versions
PERC H710 H710 Adapter 21.2.0-0007
H710 Mini Monolithic 21.2.0-0007
PERC H710P H710P Adapter 21.2.0-0007
H710P Mini Monolithic 21.2.0-0007
PERC H810 H810 Adapter 21.2.0-0007
Miscellaneous Options
The following table lists all other RAIDCFG options, parameters, and pre-defined arguments.
Table 78. Miscellaneous Optional Parameters
Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
any option
-l or logfile <filename>
Logs command line output to a file. The utility
either appends the information to an existing
136