Quick Reference Guide

Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
d vdisk=id
action=canceli
nit
cancelinit command on unsupported
controllers returns an error.
Example:
A:>raidcfg -vd -c=2 -vd=2 -
ac=ci
Resetting The Controller
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for resetting the controller.
Table 74. Resetting The Controller
Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
-ctrl -c=id -
ac=rst or
controller
controllerid=i
d action=reset
NA NA
Resets the specified controller.
Example:
A:>raidcfg -ctrl -c=2 -ac=rst
Enabling And Disabling Persistent Dedicated Hot Spares
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for enabling and disabling
dedicated hot spares.
Table 75. Enabling And Disabling Persistent Dedicated Hot Spares
Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
--ctrl -c=id -
ac=ephs
or
controller
controllerid=i
d
action=enablep
eristenthotspa
re
NA NA
Assigns the slot corresponding to the hot
spare drive as persistent. Any drive in the slot
functions as a hot spare if the drive is qualified
to be a hot spare.
Example:
A:>raidcfg -ctrl -ac=ephs -c=2
RAIDCFG Command successful!
--ctrl -c=id -
ac=dphs
or
controller
controllerid=i
d
action=disable
persistenthots
pare
NA NA
Disables the persistent slot corresponding to
the hot spare drive. If the drive is removed
from the slot and any drive is inserted, the slot
stops functioning as a hot spare. You must
manually assign the drive as a hot spare
again.
Example:
A:>raidcfg -ctrl -ac=dphs -c=2
RAIDCFG Command successful!
135