Quick Reference Guide

Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
Example:
A:>raidcfg -ctrl -c=2 -
ac=fgnclr
-ctrl -c=id
-ac=fgnrvr
or
controller
controllerid=i
d
action=foreign
recover
NA NA
Recovers the foreign configuration detected in
the selected controller. This feature is
supported on PERC 5 and later controllers and
is not supported on SAS controllers.
If you use this argument on a controller that
does not have a foreign configuration, the No
Foreign configuration present
in the controller message is
displayed.
Example:
A:>raidcfg -ctrl -c=2 -
ac=fgnrvr
Initializing Virtual Disks
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for initializing selected virtual
disks.
Table 73. Initializing Virtual Disks
Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
-vd -c=id -
vd=id -ac=fi or
vdisk
controllerid=i
d
vdisk=id
action=fastini
t
NA NA
Initializes the selected virtual disk in the
selected controller with the fastinit command.
This feature is supported on PERC 5 and later
controllers and is not supported on SAS
controllers.
Using the fastinit command on unsupported
controllers returns an error.
Example:
A:>raidcfg -vd -c=2 -vd=2 -
ac=fi
-vd -c=id -
vd=id -ac=sli
or vdisk
controllerid=i
d vdisk=id
action=slowini
t
NA NA
Initializes the selected virtual disk in the
selected controller with the slowinit
command. This feature is supported on PERC 5
and later controllers and is not supported on
SAS controllers. Using the slowinit command
on unsupported controllers returns an error.
Example:
A:>raidcfg -vd -c=2 -vd=2 -
ac=sli
-vd -c=id -
vd=id -ac=ci or
vdisk
controllerid=i
NA NA
Cancels the initialization of the virtual disk
with the cancelinit command. This feature is
supported on PERC 5 and later controllers and
is not supported on SAS controllers. Using the
134