Quick Reference Guide

Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
alhotspare
controllerid=i
d adisk|
pdisk=channel:
target:enclosu
re
Example:
A:>raidcfg -ctrl -ac=sghs -c=2
-ad=0:1
RAIDCFG Command successful!
-ad|-pd -
ac=lghs -c=id
or adisk|pdisk
-
action=listglo
balhotspare
controllerid=i
d
NA NA
Displays the array (physical) disks used for
global hot spare for the specified controller.
Example:
A:>raidcfg -ad -ac=lghs -c=2
RAIDCFG Command successful!
-ctrl —ac=rghs
-c=id -ad|-pd=
ch:targ:encl or
controller
action=removeg
lobalhotspare
controllerid=i
d adisk|
pdisk=channel:
target:enclosu
re
NA NA
Unassigns all the specified global hot spares
to a disk on the specified controller.
Example:
A:>raidcfg -ctrl -ac=rghs -c=2-
ad=0:1,0:2
RAIDCFG Command successful!
Importing And Clearing Foreign Configurations
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for foreign configurations.
Table 72. RAIDCFG Options for Foreign Configurations
Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
-ctrl -c=id -
ac=fgnimp
or
controller
controllerid=i
daction=foreig
nimport
NA NA
Imports the foreign configuration detected in
the selected controller. This feature is
supported on PERC 5 and later controllers and
is not supported on SAS controllers.
If you use this argument on a controller that
does not have a foreign configuration, the No
Foreign configuration present
in the controller message is
displayed.
Example:
A:>raidcfg -ctrl -c=2 -
ac=fgnimp
-ctrl -c=id -
ac= fgnclr
or
controllercont
rollerid=id
foreignclear
NA NA
Clears the foreign configuration detected in
the selected controller. This feature is
supported on PERC 5 and later controllers and
is not supported on SAS controllers..
If you use this argument on a controller that
does not have a foreign configuration, the No
Foreign configuration present
in the controller message is
displayed.
133