Quick Reference Guide

Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
Controller_Name: PERC 6/E
Channels: 2
No.of Virtual_Disks: 0
Firmware Version: 3500
RAIDCFG Command successful!
-c or
controllerid
<valid
controller ID
number>
Displays the properties for the RAID controller
with the specified controller ID. This option
combination is mandatory.
Example:
A:>raidcfg -ctrl -c=2
Controller_ID/Slot_ID: 2
Controller_PCI_ID: 8:14:0
Controller_Name: PERC 6/E
Channels: 2
Virtual_Disks: 1
Firmware Version: 521S
RAIDCFG Command successful!
Creating Virtual Disks
The following table lists the RAIDCFG options, parameters, and pre-defined arguments for creating virtual disks.
NOTE: If you create a virtual disk on Windows PE, you must reboot your system.
Table 61. Creating Virtual Disks
Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
-ctrl -ac=cvd -
c=id -ad=
ch:targ,ch:tar
g
,
... [or
ch:targ:encl,.
..]
or
controller
action=
createvdisk
controllerid=
id
adisk=
channel:target
: lun,...
channel:target
: lun,...
[or
channel:target
NA NA
Creates a virtual disk comprising the
properties supplied. This option combination is
mandatory.
For SCSI controllers, the value of LUN should
always be 0.
For SAS controllers, the value of enclosure
can be non-zero, in which case you must
specify values for channel, target, and
enclosure.
Example:
A:>raidcfg -ctrl -ac=cvd
-c=2
-ad=1:4,1:8 -r=1 -ssz=32
-cp=d -rp=nra
-wp=wt -fd=1:1
RAIDCFG Command successful!
117