Owner's Manual

Table 20. Other Scripts for Windows
Script Name Description Associated Files
TKENVSET.BAT Sets the path of DTK installation
and variables for the system to be
deployed and configured. The
variables and paths specified in
this file must be specified before
any of the other supporting scripts
can be used.
• SYSCFG.EXE — Used by TKENVSET.BAT to discover
the system type.
RAIDCFG.BAT Configures the selected RAID
controller detected in the system.
• TKENVSET.BAT — Used by RAIDCFG.BAT to inform the
task scripts about where to find the DTK utilities,
scripts, and configuration files.
• RAIDCFG.EXE — Used by RAIDCFG.BAT to retrieve
RAID information and configure settings.
PARTCFG.BAT Creates and populates the Dell
utility partition (UP) and the
operating system partition on a
specified disk.
• TKENVSET.BAT — Used by PARTCFG.BAT to inform the
task scripts about where to find the DTK utilities,
scripts, and configuration files.
• DISKPART.EXE — Provided by Windows; this script is
used to create partitions on your disk. When creating a
Windows PE image, ensure that the DISKPART.EXE tool
is present in the Windows PE image you created. This
script uses the following files for unattended
operations:
– UPINIT.BAT— Used by PARTCFG.BAT to
create and populate the Dell utility partition.
– FORMAT.EXE— Provided by Windows to
format the partition.
Other Scripts For Systems Running Linux Operating Systems
The following table lists the other scripts for Linux.
Table 21. Other Scripts for Linux
Script Name Description Associated Files
tkenvset.sh Sets the path for DTK installation
and variables for the system to be
deployed and configured. The
variables and paths in this file
must be specified before any of
the other supporting scripts can
be used.
• syscfg — Used by tkenvset.sh to discover the system
type.
raidcfg.sh Configures the selected RAID
controller detected in the system.
• tkenvset.sh — Used by raidcfg.sh to inform the task
scripts about where to find the DTK utilities, scripts,
and configuration files.
• raidcfg — Used by raidcfg.sh to retrieve RAID
information and configure settings.
partcfg.sh In BIOS mode, creates and
populates the Dell utility partition
and the deployment partition
(MBR type) on a specified disk. In
• tkenvset.sh — Used by partcfg.sh to inform the task
scripts about where to find the DTK utilities, scripts,
and configuration files.
44