Owner's Manual

Extracting DTK Components On Systems Running Linux

DTK components are provided as an ISO image at support.dell.com. You can use a CD/DVD burning software to burn the

ISO image on a bootable CD/DVD or loop mount the ISO image to access the image contents. To extract DTK

components to a workstation running a Linux operating system perform the following steps.

1. Download the ISO image dtk_X.X_XXX_Linux.iso from support.dell.com and save it on your system (where

is the

latest DTK version and

XXX

is the latest build for the DTK release).

2. After the image is downloaded, burn it on a CD/DVD. The directory structure on the CD/DVD (after it is mounted) is

as follows:

DTK Components On The Mounted Media

The following table describes the files, components, and other contents of the mounted media.

Table 5. Mounted Media Contents

Contents Details Location

docs Contains

Quick Installation Guide.

/mnt/cdrom/docs

LICENSING Contains all the licenses for the open source components used in the media. /mnt/cdrom/LICENSING

README Provides the latest product information. /mnt/cdrom

sa.1 Contains the Linux kernel images. /mnt/cdrom/isolinux

sa.2 Initial RAM disk containing the embedded Linux component and DTK tools. /mnt/cdrom/isolinux

RPMs Contains DTK RPMs and dependency RPMs /mnt/cdrom/RPMs