User's Manual

1. Click Start, navigate to All Programs → Microsoft Windows AIK .

2. Click Windows PE Tools Command Prompt to open a command prompt window.

3. Navigate to C:\program files\Windows AIK\Tools\x32 or C:\program files\Windows AIK\Tools\amd64 directory based

on the system.

4. Run the following command: oscdimg -n -bc:\winpe_30\etfsboot.com c:\winpe_30\ISO c:

\winpe_30\WinPE3.0.iso

WinPE3.0 iso, a media bootable ISO image is created.

You can use any CD or DVD burning software to burn the image onto a CD or DVD. After burning the ISO image, ensure

that it boots from the CD or DVD drive for all the supported Dell systems you plan to deploy. After it boots, you are

advised to test all the tools and scripts on these systems to make sure that the integration is successful and that there

are no issues with hardware components not being recognized.

Running The Image

You are now ready to use your bootable media to access the deployment components from the directory structure on

the media:

1. Boot the target system with the bootable deployment media.

2. Execute the master batch file, which calls individual task scripts and utilities from the media to complete the

deployment process.

Media-Based Local Deployment With Networking Enabled For

Systems Running Windows

This method provides greater flexibility and is highly recommended in large deployments. The prerequisites are the

availability of network bandwidth and all target systems connected to the network.

NOTE: DTK network-based deployment is not supported from mapped Novell NetWare systems.

This deployment method is easy to assemble and provides great flexibility in making changes to the scripts and

configuration files. Any change to the system configuration, for example, does not require re‑creation of the bootable

media. This method also provides access to the remote share as writable media. Hence, the configuration files captured

during the deployment automation process can be saved to this remote share.

Bootable Windows PE Media With Networking Enabled

This process includes:

• Creating a bootable Windows PE media with the appropriate network drivers. This step enables networking

services to start, get an IP address, and bring the target system into a functioning network.

NOTE: For more details on how to create a customized version of a single Windows PE bootable media that

works across all Dell supported systems and provides an underlying networking stack, see Running The

Deployment Scripts.

• Creating scripts to automatically

map

to a predefined network share.

• Accessing scripts, configuration files, and operating system installation files from the network.

Preparing And Populating The Network Share

This process includes: