User's Manual

Editing The Sample Batch Files To Perform A Complete System

Deployment

The sample scripts utilize DTK utilities, the additional supporting utilities, the source system configuration files, the

target system hardware drivers, and the operating system installation files to perform a full deployment on the target

system.

The sample scripts provided with DTK can be edited and customized using any ASCII text editor that conforms to the

hardware available on the target systems. While it is recommended that you use DTK sample scripts to automate your

deployment tasks, you can create your own system deployment batch files using any ASCII text editor by incorporating

the various DTK utilities and commands in the batch file.

NOTE: For more information about scripting batch files and specific batch file commands, see your Windows PE or

Linux operating system documentation.

Each of the utilities, scripts, and system configuration files are described below. Depending on your requirements, you

may use all or only some of them in your deployment. You can write your master deployment file to perform a full

deployment on a system with the help of utilities, scripts, and configuration files. This file is not provided with the sample

scripts.

Scripts For Deployment On Systems Running Windows

The following table lists the capture scripts for Windows.

Table 14. Capture Scripts for Windows

Script Name Description Associated Files

RACCAP.BAT Captures RAC settings to a file for

Dell Remote Access Controller 4

(DRAC 4).

• TKENVSET.BAT — Provides information to the tasks

scripts about the location of the DTK utilities, scripts,

and configuration files.

• RACADM.EXE — Retrieves RAC information and

configure settings.

SYSCAP.BAT Captures BIOS and Baseboard

Management Controller (BMC)

configuration settings and saves

them to a file.

• TKENVSET.BAT — Provides information to the tasks

scripts about the location of the DTK utilities, scripts,

and configuration files.

• SYSCFG.EXE — Configures the BIOS and BMC

settings.

RAIDCAP.BAT Captures the RAID settings and

saves them to a file

• TKENVSET.BAT — Provides information to the tasks

scripts about the location of the DTK utilities, scripts,

and configuration files.

• RAIDCFG.EXE— Retrieves RAID information and

configure settings.

Scripts For Deployment On Systems Running Linux

The following table lists the capture scripts for Linux.