User's Manual

Toolkit Components Purpose

raidcfg.ini

Sample output file to enable RAID replication.

syscfg.ini

Sample configuration file for SYSCFG utility to configure the BIOS, DRAC, and BMC settings.

Sample Scripts For Windows

The following table lists Windows sample scripts necessary to perform a scripted deployment. The sample scripts for

Windows are located at Toolkit\Template\Scripts.

NOTE: All DTK scripts are provided as examples only. The batch scripts and configuration files must be modified to

reflect the unique information for each deployed system.

Table 10. Sample Scripts For Windows

Toolkit Components Purpose

createup.cfg This file is used by UPINIT.BAT.

diskpartclr.cfg Used by PARTCFG.BAT to clear the partitions on the

selected disks.

diskpartos.cfg Used by PARTCFG.BAT to create deployment partition to

install the operating system.

LISTUP.CFG This file is used by UPINIT.BAT.

MOUNTUP.CFG This file is used by UPINIT.BAT.

UMOUNTUP.CFG This file is used by UPINIT.BAT.

DTKRUNALL.BAT Applies BIOS, BMC, RAC, and RAID settings saved in the

files to the current system.

ERRHNDL.BAT Handles errors returned in DTK scripts.

PARTCFG.BAT Creates and populates the Dell utility partition and creates

the operating system partition on a specified hard drive.

This script cleans out all existing partitions in your system

before creating and populating the partition.

RACCAP.BAT Captures Remote Access Controller (RAC) settings to a file

for DRAC 4 remote access controllers.

RACREP.BAT Applies (replicates) the RAC settings saved in a file to the

target system.

RAIDCAP.BAT Captures the RAID settings and saves them to a file.

RAIDCFG.BAT Configures the selected RAID controllers on the system.

RAIDREP.BAT Applies (replicates) RAID settings saved in a file to the

target system.

SYSCAP.BAT Captures BIOS and BMC configuration settings and saves

them to a file.

SYSREP.BAT Applies (replicates) BIOS and BMC configuration settings

and configures the target system.

TKENVSET.BAT Sets the path of DTK installation and variables for the

specific system being deployed.

UPINIT.BAT Creates and populates the Dell utility partition.