User's Manual

Toolkit Components Purpose
NOTE: This feature may not be supported on all systems.
RAC 4
Configures Dell Remote Access Controller (DRAC) 4/P and DRAC 4/I.
RAC 5
Configures DRAC 5/iDRAC.
pci.ids
Reports PCI devices when used with syscfg.exe.
disclaimer.txt
Displays the disclaimer for the tools.
racadmErrorCodes.txt
Lists the error codes and messages for the racadm.exe tool.
RaidcfgErrorCodes.txt
Lists the error codes and messages for the raidcfg.exe tool.
SyscfgErrorCodes.txt
Lists the error codes and messages for the syscfg.exe tool.
System Utilities And Supporting Files For Linux
The following table lists the files, located at /opt/dell/toolkit/bin and the supporting libraries located in /opt/dell/toolkit/lib
on systems running the Linux operating system. These are the core tools (utilities) that perform pre-operating system
configuration and deployment tasks. See the Dell OpenManage Deployment Toolkit Command Line Interface Reference
Guide at dell.com/suport/manuals for complete information about the capabilities of each DTK utility.
Toolkit Components Purpose
pci.ids Used with syscfg to report PCI devices.
racadm Wrapper script which invokes racadm4, racadm5, or racadm6 depending on the
Remote Access Controller (RAC) on your system.
racadm4 Configures DRAC 4/P and DRAC 4/I RACs.
racadm5 Configures DRAC 5 RACs.
racadm6 Configures iDRAC6.
NOTE: This feature may not be supported on all systems.
racadmErrorCodes.txt Lists the error codes and messages for the racadm tool.
raidcfg Creates and reports RAID information.
RaidcfgErrorCodes.txt Lists the error codes and messages for the raidcfg tool.
stsvc.ini Configuration file used by raidcfg.
syscfg
• Reports and configures BIOS, BMC, and DRAC.
• Maintains system state between reboots.
• Reports hardware devices and other system-related information.
SyscfgErrorCodes.txt Lists the error codes and messages for the syscfg tool.
sys.ini A .ini file used with syscfg.
UpinitErrorCodes.txt Lists the error codes and messages for upinit.sh.
26