Quick Reference Guide

Option Sub-option Valid
Arguments
Description Applicable Systems
--
solcharsendthres
hold
1–255
Specifies that the BMC
automatically sends an SOL
character data packet containing
this number of characters in
increments of 5 (1–255) as soon
as this number of characters (or
greater) has been accepted from
the baseboard serial controller
into the BMC. This option can be
replicated.
NOTE: On PowerEdge 9G and
SC1435 systems, the
maximum limit is 255.
--solbitrate
9600,
19200,
57600,
115200
Sets the serial channel
communication bit rate (in bps)
with the BMC when SOL is
activated. This option can be
replicated.
NOTE: The arguments for
solbitrate vary with
various Dell systems. If an
argument valid for a
particular Dell system is
entered for another system,
the Parameter out of
range
error is displayed.
Valid arguments are:
• 57600 — for PowerEdge
9G systems that do not
have DRAC 5 installed.
• 115200 — for PowerEdge
9G systems that have
DRAC 5 installed.
Example 1 (to display the current
SOL configuration):
A:>syscfg solcfgparams
solcfgparams
solenable=enable
solprivlevel=administr
ator
solcharaccum
interval=25
solcharsend
threshold=25
solbitrate=9600
Example 2 (to set the SOL
configuration parameters):
A:>syscfg solcfgparams
--solenable=disable
--
solprivlevel=administr
ator
97