Quick Reference Guide

solaction
Table 45. solaction options
Option Sub-option Valid Arguments Description Applicable Systems
solaction
This option enables or disables
Serial-Over- LAN (SOL) access for a
particular user. This option can be
replicated.
Example:
A:>syscfg solaction
--userid=2 --
action=disable
solaction userid=2
action=disable
All PowerEdge
systems
--userid
2–16, if your
system has a
DRAC 5
controller
Specifies the BMC user ID. This sub-
option can be replicated.
--action enable,
disable
Enables or disables the user ID
specified using the userid sub-
option. This sub-option can be
replicated and is dependent on the
userid sub-option.
solcfgparams
Table 46. solcfgparams options
Option Sub-option Valid
Arguments
Description Applicable Systems
solcfgpara
ms
Configures and displays SOL
configuration parameters. This
option can be replicated.
All PowerEdge
systems
--solenable enable,
disable
Enables or disables if the SOL
payload type can be activated.
This option can be replicated.
--solprivlevel user,
operator,
administra
tor
Sets the minimum user privilege
level required to activate the SOL.
This option can be replicated.
--
solcharaccuminte
rval
1–255
Sets the Character Accumulate
Interval in 5–ms increments (1–
255). This sets the typical amount
of time that the BMC waits before
transmitting a partial SOL
character data packet. This
option can be replicated.
96