Quick Reference Guide

Option Sub-option Valid Arguments Description Applicable
Systems
Example 1 (to enable User ID 2 on
the LAN channel with
administrator privileges):
A:>syscfg
lanuseraccess --
userid=2 --
usrprivlmt=administrat
or
Example 2 (to enable User ID 4 on
the LAN channel with user
privileges):
A:>syscfg
lanuseraccess --
userid=4 --
usrprivlmt=user
loaddefaults*
Table 34. loaddefaults option
Option Sub-option Valid Arguments Description Applicable Systems
--
loaddefaul
ts*
NA NA
Restores the BMC to the defaults
originally loaded on the controller.
This option is used to return the
BMC to a known-good state. This
option cannot be replicated.
NOTE: The NMI, power button,
and SOL defaults are not reset
by using this option.
Example:
A:>syscfg --loaddefaults
Loading defaults...
All PowerEdge
systems
nextboot
Table 35. nextboot option
Option Sub-option Valid
Arguments
Description Applicable Systems
--nextboot or
--
OneTimeBootSeq
Dev
NA valid device
name (from the
bootseq
option device
list)
Sets the specified device as the
first device in the boot order for
the next boot cycle only. The
device must be a device from the
bootseq option device list. Run
the bootseq option to see a list
of available device names. For
more information, see
--bootseq.
This option is not replicated.
All PowerEdge
systems
86