Quick Reference Guide

Option Sub-option Valid Arguments Description Applicable
Systems
Example (to configure the LAN
channel with alerts and IPMI
over LAN enabled):
A:>syscfg
lanchannelaccess--
pefalerting=enable --
ipmioverlan=alwaysava
il
lanchannelinfo
Table 32. lanchannelinfo options
Option Sub-option Valid Arguments Description Applicable Systems
lanchanneli
nfo or lci
NA NA Displays media and protocol
information about the LAN channel.
This option cannot be replicated.
All PowerEdge
systems
lanuseraccess
Table 33. lanuseraccess options
Option Sub-option Valid Arguments Description Applicable
Systems
lanuseracc
ess or lua
Configures the privilege level and
channel accessibility associated
with a specified User ID for the
LAN channel.
All PowerEdge
systems
--userid
2–16, if your
system has a
DRAC 5
controller
Sets the User ID. This sub-option
can be replicated.
--usrprivlmt user,
operator,
administrat
or,
noaccess
Sets the maximum BMC user
privilege level for the LAN
channel for the userid specified
using the useridsub-option.
This sub-option can be replicated.
This sub-option is dependent on
the
userid sub-option.
--
currentenableduse
rids
NA Reports the number of currently
enabled User IDs on the LAN
channel.
--
useridswithfixedn
ames
NA
Reports the number of User IDs
with fixed names on the LAN
channel.
85