Quick Reference Guide

Option Sub-option Valid
Arguments
Description Applicable Systems
--alertdest 1, 2, 3,
4
Sets the destination for the LAN
alert. This sub-option can be
replicated.
--vlantag enable,
disable
Enables or disables VLAN tagging.
This sub-option can be replicated.
--vlanid <string>
Sets the 12-bit VLAN ID. This sub-
option can be replicated.
--vlanpriority 0–7
Sets the VLAN priority value. This
sub-option can be replicated.
--macaddress
NA Displays the BMC MAC address.
This sub-option cannot be
replicated.
--nicselection
NOTE: This option is
available only with
the appropriate
installed license.
shared,
sharedfai
lover,
dedicated
,
sharedrec
eiveonall
Sets the operating mode of the NIC
to shared, sharedfailover,
dedicated, or
sharedreceiveonall. Some
of these options are not applicable
on certain systems.
This option is
applicable on
systems prior to
PowerEdge 12G
systems. The
sharedreceive
onall argument is
available only on
PowerEdge 11G
systems.
--nicselection
NOTE: This option is
available only with
the appropriate
installed license.
dedicated
, lom1,
lom2,
lom3,
lom4
Sets the operating mode of the
iDRAC7 NIC to dedicated,
lom1, lom2, lom3, or lom4.
Some of these options are not
applicable on certain systems due
to underlying hardware.
NOTE: This
option is
applicable on
PowerEdge 11G
systems.
--
nicselectionfailo
ver
NOTE: This option is
available only with
the appropriate
installed license.
none,
lom1,
lom2,
lom3,
lom4, all
Sets the operating mode of the NIC
selection failover to none, lom1,
lom2, lom3, lom4, or all.
Some of these options are not
applicable on certain systems. due
to underlying hardware.
NOTE: This
option is
applicable on
PowerEdge 12G
systems.
--fullduplex
enable,
disable
Enables or disables full duplex on
the RAC network interface.
--autoneg enable,
disable
Enables or disables
autonegotiation.
--speed 10,100
Sets the network interface speed
to 10 or 100 Mbps.
--dnsdhcp enable,
disable
Enables or disables obtaining the
DNS server IP address through
DHCP.
82