Quick Reference Guide

lancfgparams
Table 30. lancfgparams options
Option Sub-option Valid
Arguments
Description Applicable Systems
lancfgpara
ms or lcp
Configures and displays LAN
configuration parameters. This
option can be replicated.
All PowerEdge
systems
--ipaddrsrc static,
dhcp
Sets the IP address source for the
LAN channel. This sub-option can
be replicated.
--ipaddress <ipaddres
s>
Sets the IP address for the LAN
channel. This sub-option cannot be
replicated.
--subnetmask <subnetma
sk>
Sets the subnet mask for the LAN
channel. This sub-option can be
replicated.
--gateway <gateway>
Sets the gateway for the LAN
channel. This sub-option can be
replicated.
--commstring <string>
Sets the community string
(maximum of 16 printable ASCII
characters) used in a platform
event trap (PET). This sub-option
can be replicated.
--destipaddr
<ipaddres
s>
Sets the destination IP address or
Fully Qualified Domain Name
(FQDN) for the alert destination
specified with the alertdest
sub-option.
The destipaddr sub-option is
dependent on the
alertdest
suboption. If the alertdest sub-
option is not specified on the
command line, the first alert
destination (
alertdest=1) is
set with this IP address or FQDN.
This sub-option can be replicated.
Example 1 (to set the destination IP
address):
A:>syscfg lcp --
alertdest=1 --
destipaddr=192.168.100.
15
Example 2(to set the destination IP
address as FQDN):
A:>syscfg lcp --
alertdest=1 --
destipaddr=xxx.yyy.com
NOTE: FQDN is
applicable only
for
destipaddr
option and is
supported only
on PowerEdge
12G systems.
81