Quick Reference Guide

One-Time Boot
Table 15. One-Time Boot Options
Group Option Valid Arguments Description
One-Time
Boot
--OneTimeBootMode Disabled,
OneTimeBootSeq,
OneTimeHddSeq,
OneTimeUefiBoot
Seq,
OneTimeCustomB
ootSeqStr,
OneTimeCustomH
ddSeqStr,
OneTimeCustomU
efiBootSeqStr
Allows to set the one-time boot sequence.
--
OneTimeBootSeqDev
numerical list separated
by commas or list of
device names separated
by commas
Determines the one-time boot device when
the One- Time Boot Device List is set to BIOS
Boot Sequence Device. If Boot Mode is set to
UEFI, the system temporarily switches the
Boot Mode to BIOS when attempting a one-
time boot to the device.
--OneTimeHddSeqDev
numerical list separated
by commas or list of
device names separated
by commas
Determines the one-time boot hard disk
when the One-Time Boot Device List is set to
BIOS Hard-Disk Drive Sequence Device. If
Boot Mode is set to UEFI , the system
temporarily switches the Boot Mode to BIOS
when attempting a one-time boot to the
device.
--
OneTimeUefiBootSeq
Dev
numerical list separated
by commas or list of
device names separated
by commas
Determines the one-time boot device when
the One-Time Boot Device List is set to UEFI
Boot Sequence Device. If Boot Mode is set to
BIOS, the system temporarily switches the
Boot Mode to UEFI when attempting a one-
time boot to the device.
Processor Settings
Table 16. Processor Settings Options
Group Option Valid Arguments Description
Processo
r Settings
--DataReuse Enabled, Disabled
Enables (default value) or disables data reuse
in cache.
--DcuIpPrefetcher Enabled, Disabled
Enables (default value) or disables DCU IP
Prefetcher.
--
DcuStreamerPrefetch
er
Enabled, Disabled
Enables (default value) or disables DCU
Streamer Prefetcher.
--LogicalProc Enabled, Disabled
When this option is set to Enabled (default
value), the BIOS reports all logical processors.
When set to Disabled, the BIOS only
reports one logical processor per core. Each
69