Quick Reference Guide

Group Option Valid Arguments Description
configuration can support node
interleaving.
NOTE: The NodeInterleave
option is same as memintleave
option. For more information, see
memintleave.
--SerialDbgOut
Enabled,
Disabled
Enables or disables the RC/MRC Serial
debug output.
--SysMemSize <string>
Displays the amount of main memory in
the system.
--SysMemSpeed <string>
Displays the clock frequency of the main
memory.
--SysMemType <string>
Displays the type of main memory
installed in the system.
--SysMemVolt <string>
Displays the voltage of the main memory.
--VideoMem <string>
Displays the total amount of video memory
available to the embedded video
controller.
Miscellaneous Settings
Table 14. Miscellaneous Settings Options
Group Option Valid Arguments Description
Miscellaneous
Settings
--AssetTag <string>
Displays the Asset Tag and allows the
Asset Tag to be modified.
NOTE: The Asset Tag is a string
assigned to a system, usually by an
administrator, for security or tracking
purposes. The Asset Tag can be up to
10 characters long and can contain
only printable US-ASCII characters.
--ErrPrompt
Enabled,
Disabled
Enables (default value) or disables the
F1/F2 prompt on error.
--
InSystemCharac
terization
Enabled,
Disabled
Enables or disables In-System
characterization.
--NumLock On, Off
Determines whether the system boots with
NumLock turned on or off. This does not
apply to 84- key keyboards.
--ReportKbdErr Report, Noreport
Sets if keyboard-related error messages
are reported at system startup or not.
68