Quick Reference Guide

Integrated Devices
Table 12. Integrated Devices Options
Group Option Valid Arguments Description
Integrated
Devices
--EmbNicPortnBootProto Unknown, None,
Pxe, Iscsi
Controls the legacy boot protocol of the
LOM port specified by the embedded
NIC port number. This is a write-only
attribute. This attribute is for systems
management software use, and does
not appear in system BIOS setup. This
attribute always returns Unknown,
when read. There is no change to the
LOM port legacy boot protocol setting
when Unknown is returned. An error is
returned if written with a setting
(
None, PXE, or iSCSI) that is
not supported by the LOM Port.
--EmbVideo Enabled,
Disabled
Enables or disables the BIOS support
for the Embedded Video Controller.
--IntegratedNetwork1 Enabled,
DisabledOs,
Enables or disables Integrated Network
1.
NOTE: If set to DisabledOs, the
Integrated NICs may still be
available for shared network
access by the embedded
management controller. This
function must be configured
through the NIC management
utilities provided with your system.
--IntegratedNetwork2
Enabled,
DisabledOs
Enables or disables Integrated Network
2.
NOTE: If set to DisabledOs, the
Integrated NICs may still be
available for shared network
access by the embedded
management controller. This
function must be configured
through the NIC management
utilities provided with your system.
--IntegratedRaid
Enabled,
Disabled
Enables or disables the integrated RAID
controller.
--IntegratedSas Enabled,
Disabled
Enables or disables the integrated SAS
controller.
--InternalSdCard On, Off
Turns the internal SD card port on or
off.
--
InternalSdCardRedundan
cy
Mirror,
Disabled
Sets the internal SD card port
redundancy to Mirror mode or
Disabled.
65