Quick Reference Guide

Description
Reports the service tag for a system. If used with the -s general option, the
environment variable is set to the service tag.
Example:
A:>syscfg --svctag
svctag=113CD1S
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems except Blade
systems.
--syspwd
Option
--syspwd
Valid Arguments < string >
Description
Sets the system password for the BIOS. The system password is required when
booting the system. The argument string supplied to this option is the password.
Generally, passwords are limited to alphanumeric characters and cannot
exceed 32 characters in length. If a current system password is set, it must be
given through the oldsyspwd option. This option is not replicated. For more
information on delimiters, see Command Line Option Delimiters .
Example 1:
A:>syscfg --syspwd=password
The password has been set. Please use a warm reboot
to apply the password to the system.
Example 2:
A:>syscfg --syspwd=password --oldsyspwd=password
The password has been set. Please use a warm reboot
to apply the password to the system
.
NOTE: You cannot disable your password using DTK. To disable your
password, you must use the system BIOS.
Applicable Systems
All PowerEdge systems prior to PowerEdge 12G systems.
--sysrev
Option
--sysrev
Valid Arguments NA
Description
Reports the system revision. This is a read-only option.
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
tpm
Option
tpm
Valid Arguments NA
Description
For details about the tpm suboptions and arguments, see Sub Options For tpm
Option.
Applicable Systems PowerEdge 10G and 11G systems
57