Quick Reference Guide

NOTE: You cannot disable your password using DTK. To disable your
password, you must use the system BIOS.
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
--sma
Option
--sma
Valid Arguments enable, disable
Description
Enables or disables processor sequential memory access.
Example:
A:>syscfg --sma=disable
sma=disable
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
--slotname*
Option
--slotname*
NOTE: The asterisk is not part of the command syntax.
Valid Arguments NA
Description
Reports the slot name of the blade.
Example:
A:>syscfg --slotname
slotname=Slot5
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
--sriov
Option
--sriov
Valid Arguments enable, disable
Description
Enables or disables support for Single Root I/O Virtualization (SR-IOV) devices.
Example:
A:>syscfg --sriov=disable
sriov=disable
Applicable Systems PowerEdge R410, R510, R610, R710, R910, T410, T610, and T710 systems prior to
PowerEdge12G systems with Intel Xeon processor 7500/6500 series.
--svctag*
Option
--svctag*
NOTE: The asterisk is not part of the command syntax.
Valid Arguments NA
56