Quick Reference Guide

--qpibandwidthpriority
Option
--qpibandwidthpriority
Valid Arguments compute, io
Description
Sets the bandwidth priority to compute or io. Set to compute for computation-
intensive applications. Set to io for I/O intensive applications. This option can
be replicated.
Example:
A:>syscfg --qpibandwidthpriority=compute
qpibandwidthpriority=compute
Applicable Systems Dell PowerEdge 11G systems
--redmem
Option
--redmem
Valid Arguments off, spare, mirror, DDDC
Description
Allows selection of the required redundant memory mode, or disables
redundant memory. This option can be replicated.
Example:
A:>syscfg --redmem=off
redmem=off
Applicable Systems PowerEdge M910, R910, and R810 systems with Intel Xeon 7500 series
processor.
--remflashmedia
Option
--remflashmedia
Valid Arguments read-only
Description
Displays the redundancy status of internal dual SD module. The status can be:
• Full — Secure digital card (SD) 1 and 2 are functioning properly.
• Lost — Either any of the secure digital cards or both are not
functioning properly.
The option also displays the status of the individual SD cards as follows:
• Active — The card is used for secure digital reads.
• Standby — The card is receiving a copy of all secure digital reads.
• Failed — An error is reported during a secure digital read or write.
• Absent — No secure digital media is detected.
• Offline — At boot, card identification signature is different from the
non-volatile storage value or card is the destination of a copying
operation that is in progress.
• Write Protected — The card is write-protected.
50