Quick Reference Guide

Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.

--logicproc

Option

--logicproc

Valid Arguments enable, disable

Description

Enables or disables logical processing for a system. This option is available on

all systems that support logical processing (Hyperthreading).

This option can be replicated.

Example:

A:>syscfg --logicproc=enable

logicproc=enable

Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.

--lpt

Option

--lpt

Valid Arguments lpt1, lpt2, lpt3, disable

Description

Configures or reports the I/O address of the LPT (parallel) port. This option is

available on all supported systems with an LPT port. This option is recorded to

an output file for replication.

Example:

A:>syscfg --lpt=lpt1

lpt=lpt1

Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.

-memdynamicpower

Option

--memdynamicpower

Valid Arguments enable, disable

Description

Enables or disables the dynamic memory power states. This option can be

replicated.

Example:

A:>syscfg --memdynamicpower=enable

memdynamicpower=enable

Applicable Systems PowerEdge R910 system with Intel Xeon 7500 series

--memintleave

Option

--memintleave

Valid Arguments enable, disable

Description

Enables or disables the memory interleave mode. This option can be replicated.