Quick Reference Guide

--ioat
Option
--ioat
Valid Arguments enable, disable
Description
Enables or disables the I/O Acceleration Technology (I/OAT) DMA Engine
option. This option must be enabled only if the hardware and software support
I/OAT on your system. This option can be replicated.
Example:
A:>syscfg --ioat=enable
ioat=enable
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
--lcd
Option
--lcd
Valid Arguments default, none, user, idracipv4address, idracmacaddress, ossystemname,
servicetag, ipv6address, ambienttemp, systemwatts
Description
Displays the default string (model name and number for PowerEdge systems
earlier than Dell PowerEdge 11G, and service tag for PowerEdge systems 11G
and later) or a userdefined string on the front-panel LCD based on the specified
argument. This option can be replicated.
Example:
A:>syscfg --lcd=default
lcd=default
Applicable Systems PowerEdge 11G systems
--lcd1
Option
--lcd1
Valid Arguments < string >
Description
Sets the first line of user-defined text on the system LCD. This option can be
replicated. For more information on delimiters, see Command Line Option
Delimiters.
NOTE: Before setting user strings for --lcd1 , ensure that --lcd is set
to user.
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
--lcd2
Option
--lcd2
Valid Arguments < string >
Description
Sets the second line of user-defined text on the system LCD. This option can be
replicated. For more information on delimiters, see Command Line Option
Delimiters.
43