Quick Reference Guide

Example:
A:>syscfg --fsbr=9600
fsbr=9600
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
--hddfailover
Option
--hddfailover
Valid Arguments off, on
Descriptionoff
Specifies the device in the Hard Disk Drive Sequence menu that has not been
attempted in the boot sequence. When set to on, all devices are attempted in
an order in which they are configured. When set to off, only the first device in
the hard disk sequence is attempted. This option can be replicated.
Example:
A:>syscfg --hddfailover=on
hddfailover=on
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
--hpcmode
Option
--hpcmode
Valid Arguments enable, disable
Description
Enables or disables the High Performance Computing (HPC) Mode. When set to
enable, the HPC is enabled utilizing only the high frequency P-State settings.
When set to disable (default value), all P-States inherent to the CPU are used.
To fully enable HPC Mode, set the power management to custom, cpu power
and performance management to OsDbpm, and fan power and performance
management to maximum performance.
Example:
A:>syscfg --hpcmode=enable
hpcmode=enable
Applicable Systems PowerEdge R715, R815, and M915 with AMD Opteron 6200 series processor
--htassist
Option
--htassist
Valid Arguments enable, disable
Description
Enables or disables the Probe Filter chipset option. Some applications may
have lower performance when the chipset feature is disabled.
Example:
A:>syscfg --htassist=enable
htassist=enable
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems with AMD Opteron
processors.
40