Quick Reference Guide

When set to rad , the external serial connector is routed to the remote access
device interface. Terminal escape sequences can toggle the external
connector between the system (COM2) and the remote access device.
This option can be replicated.
Example:
A:>syscfg --extserial=com1
extserial=com1
The --serialcomm option can be used with the external serial (--extserial)
option instead of the --conred (available on systems earlier than PowerEdge 9G
systems) option.
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems except Blade
systems.
--embsdcard
Option
--embsdcard
Valid Arguments off, on
Description
Enables or disables the embedded SD card port.
Example:
A:>syscfg --embsdcard=off
embsdcard=off
Applicable Systems PowerEdge 11G systems
--embvideoctrl
Option
--embvideoctrl
Valid Arguments enable, disable
Description
Enables or disables the embedded video controller.
Example:
A:>syscfg --embvideoctrl=enable
embvideoctrl=enable
Applicable Systems PowerEdge 11G systems
--fiberchannel
Option
--fiberchannel
Valid Arguments enable, disable
Description
Enables or disables embedded fiber channel. This option can be replicated.
Example:
A:>syscfg --fiberchannel=enable
fiberchannel=enable
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
38