Quick Reference Guide

Description
Configures an embedded SATA RAID controller. This option can be replicated.
• off — disables the embedded SATA RAID controller.
• combined — sets the SATA RAID controller to combined mode.
• ata — sets SATA RAID controller to ATA mode.
• ahci — sets ATA RAID controller to ahci mode.
• raid — sets SATA RAID controller to RAID mode.
• qdma — sets the SATA RAID controller to support ATAPI devices at
transfer rates much higher than PIO. A device driver must be installed
on your system to use the QDMA mode.
Example:
A:>syscfg --embsataraid=off
embsataraid=off
Applicable Systems
All PowerEdge systems prior to PowerEdge 12G systems.
--embscsi1
Option
--embscsi1
Valid Arguments
on, off
Description
Turns the first embedded SCSI controller. This option is only valid for supported
systems that have an embedded SCSI controller. This option can be replicated.
Example:
A:>syscfg --embscsi1=on
embscsi1=on
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
--embscsi2
Option
--embscsi2
Valid Arguments
on, off
Description
Turns the second embedded SCSI controller. This option is only valid for
supported systems that have an embedded SCSI controller. This option can be
replicated.
Example:
A:>syscfg --embscsi2=on
embscsi2=on
Applicable Systems All PowerEdge systems prior to PowerEdge yx2x systems
--embscsiraid
Option
--embscsiraid
Valid Arguments
raid, off, scsi
Description
Sets the specified value for the SCSI RAID controller. This option is only valid
for supported systems that have SCSI ROMB. Some systems do not support the
scsi argument. This option can be replicated.
36